Drawing a Circle With 6 Slices

Download Article

Download Article

At that place are a number of different ways to dissever circle into equal parts. If you lot are using a pencil and paper, you will need a compass to divide the circumvolve accurately into six equal pieces. If you demand to divide the circle for graphic design purposes, you may desire to utilize Adobe Illustrator or InDesign. Although these programs are similar, the methods to split the circle are unique to each program.

1. one

   Draw a circle with the compass. Align the pencil tip with the tip of the needle. Identify the indicate of the compass down on the paper. Set up the distance between the pencil and needle equal to the radius of the circle that yous would similar and draw. Swing the compass around 360° to complete the circle.^[1]

   • Make sure the swivel is tight so it doesn't slip while drawing.
   • Also brand sure the pencil is securely in its holder so information technology too doesn't move while cartoon.
   • This first circle is the main circle that you lot will be dividing.

2. 2

   Draw a second circle whose centre is the edge of the offset circle. Place the needle of the compass at any point along the edge of the main circle. Go on the distance between the needle and pencil the same equally the first circumvolve. Swing the compass around to complete the second circumvolve.^[ii]

   • The second circle should overlap with the first circumvolve and the edge should cantankerous through the centre of the first circumvolve.
   • If the distance between the needle and the pencil changes at all, the circumvolve will not exist divided equally.

   Advertisement

3. 3

   Use the intersection of the first and 2nd circle to draw a 3rd circumvolve. Place the needle at the intersection of the kickoff and 2d circle. There are two intersections and you lot can use either i; this will be the middle of a third circle. Use the compass to complete the tertiary circle.^[3]

   • Once more, proceed the compass at the aforementioned distance for every circumvolve you draw.
   • At this point y'all should have three overlapping circles. You should notice that the 2 outer circles overlap with the center of the first primary circle.

4. four

   Draw a fourth circle using the intersection of the master circle and the 3rd circle. Merely as you lot did to describe the 2nd and third circle, employ the intersection of the 3rd circle with the main circle every bit the center point. Remember, going clockwise around the circle, you will use the intersection to the left of the circle. Place the compass on that intersection and depict a fourth circle.^[four]

   • You are halfway washed with cartoon circles.

5. five

   Draw three more circles using the next intersection of each circle. Using the intersection of the previously fatigued circle with the main circumvolve every bit the heart, draw the side by side circle. Continue the next iii circles until you have a total of six circles all around the master circle.^[v]

   • The inside of your original circle should now look like a half dozen petaled blossom.

6. 6

   Use a ruler to depict a straight line through the eye of the circle. This is the first of three lines y'all will need to draw to dissever the circumvolve into 6 parts. Every line, including this one, should cantankerous the exact center of the circle and split up 2 of the half-dozen inner "flower petals" of your cartoon in half.

7. seven

   Draw another straight line one flower petal (or threescore degrees) clockwise from the first. This line will bisect two opposite blossom petals and will go through the verbal center of the circumvolve.^[6]

8. 8

   Draw your final straight line ane more flower petal (or 60 degrees) clockwise from the last. Y'all now have a circumvolve divided into 6 equal parts.

   Advertizement

1. ane

   Describe a line through the center of the circumvolve. The first footstep to dividing the circle is cutting information technology directly in half. Choose a bespeak anywhere forth the circumvolve and describe a line through the center of the circle to the contrary terminate. The circumvolve is now divided into 2 equal pieces.

   • This method works well if you are trying to cut a pie or a cake.

2. ii

   Draw ii more lines that divide i half of the circle into thirds. Side by side, you want to draw two lines that cut the one-half into thirds. Yous can gauge this by dividing one one-half of the block into 3 equal pieces.

   • Go as close to three equal pieces as possible. Again, this method is just an approximation.

3. 3

   Extend those lines into the other half of the circle. Continue both of those lines through the middle of the circle to the opposite side of the circle. If done correctly, the circle should now be divided into six approximately equal parts.

   • This method is non exact, only is an easy way to divide the circle into vi equal parts by eye.

   Advertisement

1. 1

   Launch Adobe Illustrator. If you have a shortcut on your desktop, yous can open the application by double-clicking on this icon. If you don't have a shortcut, use the commencement menu or search for the application and open it from the search bar.

2. 2

   Locate the Polar Grid tool. The Polar Grid tool is one of the options in the toolbar on the left side of your screen. It is under the Line Segment group of tools. It kind of looks like a spider web; it is a circumvolve with divided lines through it.

   • To see the tools nested underneath the Line Segment, click and hold on the Line Segment tool until a window opens with more options.
   • Click on the Polar Grid tool to activate it.

3. 3

   Click and drag to create a circumvolve. With the Polar Grid tool active, click on the canvas and drag the mouse to create the circle. You should come across a circumvolve appear that likely has smaller concentric circles within it. These can be removed afterward.

   • While dragging, adjust the size of the circle past dragging in and out until you reach the desired size.
   • Hold ⇧ Shift to snap to a perfect circle.
   • Go along property ⇧ Shift and don't release the mouse click until you cease the next step.

4. 4

   Dissever into parts using the arrow keys. While dragging the circle, press on the right arrow key until yous see that the circle has been divided into half-dozen equal parts. If you accidentally press the central also many times, simply button the left pointer fundamental to decrease the number of divisions.

   • When the circumvolve is the size you want and divided into half-dozen equal parts, you can permit go of the mouse.
   • If you allow go of the mouse as well early, there is an alternative method: Go on the Polar Grid tool agile (don't click dorsum to the black arrow) and click on any whitespace in your document. An options carte du jour volition pop up and y'all tin can gear up the number of divisions to 6 and remove the concentric dividers past setting that choice to 0.

   Advertisement

1. 1

   Locate the Ellipse tool and create a circle. The Ellipse tool is role of the toolbar on the left side of the screen. Information technology is a shaded ellipse. Concord down ⇧ Shift and click on the white sail, and drag the circle to the size that you want.

   • Release the click on the mouse and then release ⇧ Shift to make a perfect circle.

2. ii

   Identify both vertical and horizontal guides through the centre of the circle. To place a vertical guide, click on the vertical ruler and drag correct towards the circle. Place the guide over the vertical center points of the circle. To identify the horizontal guide, click on the horizontal ruler and drag down toward the circle.^[7]

   • If the guides don't get properly placed the first time, yous tin can click on them again and drag them into place.

3. 3

   Locate the Polygon Frame tool. The Polygon Frame tool is located in the left toolbar underneath the Rectangle Frame tool group.^[8] Click and concur on the Rectangle Frame tool to reveal the icons underneath. The tool looks similar a hexagon with an "X" through it.

   • Click on the Polygon Frame tool to make information technology active.
   • It will now exist the icon showing on the toolbar.

4. 4

   Draw an equilateral triangle with the Polygon Frame tool. With the Polygon Frame tool selected, click onto the white canvas to open the options dialog box. Set the number of sides to three and click okay.^[9] With ⇧ Shift held downwards, click and elevate a triangle that is slightly longer than the radius of your circumvolve.

   • Don't release ⇧ Shift until after you let go of the mouse click. This will ensure that you have fabricated a perfect equilateral triangle.

5. 5

   Align the triangle with the eye of the circle. Brand sure the black arrow is selected on toolbar and click on the triangle. Drag it to the centre of the circle so that the lesser-left corner snaps to the centre of the circle.

   • The correct side of the triangle should hang outside the circumvolve with the bottom and left side of the triangle intersecting the circle.

6. 6

   Join the circle and the triangle into a wedge with the Intersect tool. Highlight both the triangle and the circumvolve. With both highlighted, observe the Intersect tool nested under Object>Pathfinder. After clicking Intersect, the circle should disappear and a wedge shape should appear.

   • This wedge is ane-sixth of the circumvolve.

7. seven

   Copy and rotate the wedge 60°. Highlight the wedge and correct click. Click on Transform>Rotate. Fix the angle to 60° and click Copy. Once you click re-create, a second wedge, rotated 60° from the original wedge, will announced.

   • Align this 2d wedge next to the kickoff wedge. Y'all will start to see the circumvolve forming.

8. viii

   Repeat the rotate and copy procedure until you take 6 wedges. Using the 2nd wedge you lot just made, right click once again and rotate and copy the second wedge. This will grade a third wedge that yous can place next to the 2nd. Repeat this with the third, fourth, and 5th wedge until yous accept 6 total wedges.

   • Align each wedge next to the previous 1 until y'all have a perfect circle divided into 6 equal parts.

   Advertisement

Add together New Question

• Question

  How do I split a circle into 4 equal parts using a set square?

  

  First you have to detect and mark the exact center of the circumvolve. Then describe a direct line from 1 side of the circumvolve through the center to the other side of the circle. That's a diameter. Finally, apply the set square to draw some other diameter perpendicular to the first diameter. Y'all have now divided the circle into four equal quadrants.

• Question

  How tin can I separate a circle into nine equal parts?

  

  Describe a radius. And then, using a protractor, draw eight more radii, each 40° from the nearest radius.

• Question

  How tin I split up a circle into seven equal parts?

  

  360° ÷ 7 = 51.43°. Use a protractor to draw eight radii, each approximately 51.43° from each other.

• Question

  If I wanted to cut a six" diameter block into ten even slices using a protractor to mark the top border (circumference) of the cake, how would I calculate the distance?

  

  Carve up 360° by 10. That's 36°. Use the protractor to measure ten slices of 36° each.

Ask a Question

200 characters left

Include your e-mail accost to go a message when this question is answered.

Submit

Advertisement

Video

Thanks for submitting a tip for review!

About This Article

Article Summary 10

To divide a circle into 6 equal parts, start by cartoon a line through the center of the circle starting on a point anywhere forth the border and ending at the contrary edge. Next, draw two more lines that separate one-half of the circle into three parts, making sure that the sections are as equal as possible. Then, extend those 2 lines into the other half of the circle to the opposite edges to create half-dozen wedge shapes. For tips on dividing a circle into equal parts using a compass, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 171,491 times.

Did this article aid y'all?

brownlowcamery.blogspot.com

Source: https://www.wikihow.com/Divide-a-Circle-Into-6-Equal-Parts

Share :